|
Venturi scrubbers are able to achieve very high particle
collection efficiencies, sometimes over 99%. The efficiency is primarily due to
contact and absorption.
Dirty exhaust gas enters the Venturi throat section at high
velocity and collides with a large volume of tiny liquid droplets. The atomized
wash water also reduces wear on the scrubber shell by protecting surfaces from
abrasion.
Ejector Venturi
Scrubbers
Ejector Venturi Scrubbers can remove gaseous pollutants from
many industrial processes. They are effective in removing noxious gases,
particulates, odors, and fumes from a variety of applications including cement
kiln emissions, basic oxygen furnaces, fly ash removal, coal gasification,
industrial and utility boilers and many others. They also have some of the
highest particle collection efficiencies of any wet scrubber type, with some
exceeding 99%. Dual Throat Venturi
Scrubbers
Venturi scrubbers use a combination of shear and impaction
forces to break water into a fine cloud of small droplets at high density. This
increases the likelihood of collisions between condensed VOCs and particulate
matter in an exhaust gas stream, resulting in absorption of volatile organic
compounds (VOCs). Wet Throat Venturi
Scrubbers
The dirty exhaust gas enters the flanged scrubber inlet
connection via ductwork from the process or emission source. The scrubbing
liquid is supplied from a recycle pump through tangential feed pipes that
connect to the venturi throat. The feed pipes are typically made of abrasion
resistant linings, which prevent erosion and plugging. Cyclonic Venturi
Scrubbers
Venturi scrubbers can achieve 99%+ particulate removal
efficiency, and have been developed for many different processes including
mining, chemical, food, explosive dust, and metallurgical applications. They
are particularly useful in processes that require high inlet gas temperatures,
or high percentage of solids in the liquid recirculation loop. This is because
the cyclonic separator design significantly reduces the amount of contaminant
solids in the scrubber system. For more details visit at - https://watermanaustralia.com/product/fgd-venturi-scrubbers/
or contact us at below mention address Waterman
Engineers Australia 12 Bejar St Schofields, NSW 2762 AUSTRALIA
Email - water@watermanaustralia.com
|
