BEST ACRYLIC PAINT TO BUY - Dubai

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint  for internal and external surfaces in permanent contact with water.

TECHNICAL DATA:

Consistency: thick liquid.
Colour: colours from the colour chart range using the ColorMap_® automatic colouring system
Density (EN ISO 2811-1) (g/cm³): approx. 1.18.
Dry solids content (EN ISO 3251) (%): approx. 59.
Dilution rate: diluted with 5-10% of water.
Recoat time: 24 hours.
Application temperature range: from +10°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller or brush (spray only for structures which are not immersed in water).
Consumption:
– 0.3-0.5 kg/m² (for two coats of the product) for structures which are not immersed in water;
– 0.6-0.8 kg/m² (for two/three coats of the product) for structures which are immersed in water.
Packaging: 20 kg.

WHERE TO USE 

Painting indoor and outdoor structures where the substrate needs to be covered with a flexible protective coating suitable for direct contact with water. Protecting horizontal concrete surfaces not used for foot traffic against contact with rainwater, such as flat roofs waterproofed with Mapelastic or Mapelastic Smart. Elastocolor Waterproof improves resistance to chemicals and acid rain and, if suitably coloured, reduces the absorption of sun rays and, therefore, over-heating of the surface. Painting architectural elements waterproofed with Mapelastic or Mapelastic Smart to provide sufficient protection against the sun, acid rain and atmospheric agents in general. Finishing off the internal surfaces of water tanks and swimming pools waterproofed with Triblock Finish and Mapecoat I 600 W where the skimming layer needs to be covered with a compatible, flexible finishing coating in permanent contact with water.